Nov 5, 2008

MINWAX Sanding Sealer Pt 2

IMG_0556 - Copy

I recently posted on the MINWAX Sanding Sealer in October but after preparing for a review on sanding sealers I thought I better leave this one out. This product is not at all like the sanding sealers you are probably used to. I'm not certain I would call this product sanding sealer at all in comparison to all the others.

Here is what you should know about applying this product.

Number one, you need to have smooth bare wood to start because this sealer will not allow you to sand off anything but lint and I'm not joking. The sealer itself doesn't allow you to cut through it but rather sand off anything on the surface and barely at that. So if you have slight rough wood under the sealer, you wont be able to get to it.

IMG_0736a Number two, If you apply this product to poplar trim for example, not only will the poplar soak up the sealer like a sponge but there is no way in hell you will get it baby ass smooth like you can with any other sealer out there. If you ever sanded polyurethane, this is far worst.

The photo above shows Do It Best brand sanding sealer on the baseboard and Minwax sanding sealer on the casing, both sanded. Notice how the baseboard clearly sanded smooth and to a powder where the casing was not.

Number three, call me Caption Obvious but there is something about calling a product "sanding" sealer when you cant sand it.

No comments: