Oct 22, 2008

How to paint or stain windows

IMG_0562Here is a quick How To for painting or staining windows. These are Andersen Windows. I first removed the window latch hardware and cleaned them up with a shop vac.
IMG_0563Next, pull the back sash (outer most) down a bit and unlock the front sash and allow it to open into the room. I will be starting on the bottom of the back sash first.
IMG_0564Starting at the bottom of the back sash and working my way up on the right.
IMG_0565Continuing up on the left
IMG_0566Across the top
IMG_0567While the front sash is still down, run around the trim closest to the track so when the sash is popped back in place that area is complete.
IMG_0568Lift and hold the front sash and finish the top edge
IMG_0569Pop the front sash back in place and push down a bit to lock in (you will hear it) and slide the sash back up a bit
IMG_0571Finish off the front sash
IMG_0572Slide the front sash up to allow you to finish remaining area closest to the track guide
IMG_0573Here is completed area around track guide. At this point you can slide the front sash down and finish the casing areas. This is a good time to step back and look over your work.
IMG_0574

Here is one portion completed. You can click photos for larger viewing. This method allows me to do one double-hung window in 7 minutes. I do them exactly the same every time.

No comments: